Screw Retained Bridge
Zirconia for screw retention · 22 and 25 mm
Manufacturer: YilinkSKU: YL-SRBIn stock
A dedicated disc for screw-retained bridges: the cervical zone occupies ≥40% of the height at ≥1100–1180 MPa. No staining needed.
This is not a universal material, and that is the whole point. The disc is designed for one job — screw-retained bridges on implants — and every trade-off inside it favours that job.
Cervical zone
In an ordinary multilayer disc the high-strength zone takes about a quarter of the height. Here it is at least 40% at 1100–1180 MPa. For a structure supported by implants and carrying screw channels this matters: that is exactly where stress concentrates.
Geometry
Only 22 and 25 mm thicknesses are available. This is not a supply limitation but a design requirement: full-arch work with screw channels cannot be milled from a thin disc.
Aesthetics
The gradient of shade, translucency and strength is seamless, giving a natural three-dimensional effect. No staining required — saving a step and eliminating colour drift between cases.
Special processing
Yilink's dedicated process minimises sintering distortion, which for extended frameworks means fewer remakes.

